Insulated metal panels are an efficient way to construct a cold storage room. With panels a high insulation value can be achieved while keeping the construction weight down. Specifically for controlled atmosphere storage rooms a 'free standing' concept gives the best possible results for a stable environment inside and outside of the room. Besseling Construction can help you with the design, supply and installation of your sandwich panel storage room.
SALCO CA-ULO COLD STORE DOORS
Fruit is a sensitive product and must be stored under proper conditions. Salco understands that and supplies gas-tight cold store doors. In the early 1980's the ULO / CA preservation of fruit was awaiting and demand for gas-tight doors emerged. Salco developed a gas-tight cold store door with a unique, patented inflatable sealing system. For a successful preservation, an absolutely gas-tight space is required. The door is a critical part of this. The gas-tight doors of Salco can be opened and closed in a matter of minutes. Even with irregularities in the floor or wall, the door remains 100% closed due to the inflatable seal.
SALCO REFRIGARATION AND FREEZER DOORS
Salco refrigeration, freezer doors are available in various versions. This allows you to choose between manually or electrically operated and between a horizontal sliding, vertical sliding or turning door. Special stainless steel versions are available for use in the food processing industry. The refrigeration doors are available in very large dimensions. The doors are seamless and close perfectly.
SALCO INDUSTRIAL DOORS
Salco industrial doors are tailored for various applications, in example: potato, flower bulbs, union storage, air conditioned warehouses or production facilities, etc. The design and quality construction makes these stand out from the crowd. All door types can be sized to your requirements. Salco doors are very user friendly in operation and have only low maintenance requirements.
RIBBSTYLE COATINGS - RIBBFILL
The RibbFill products are applied as gas-tight finishing of rooms, which become optimally controllable when the coating system is applied. These extremely gas-tight, durable and wear-resistant coatings are high-quality, semi-fluid white pastes, dispersed in water, which form a permanent elastic rubber-like layer after drying. The RibbFill coating system consists of RibbFill Store Coat and RibbFill Control Coat.
Store coat The RibbFill Store Coat has been developed specifically for the protection of polystyrene and for joint finishing in sandwich panel systems for the gas-tight finishing of spaces. This coating is often used in storage spaces for long term storage of fruit and vegetables, server spaces, high stage rooms and disinfection spaces. The coating retains a high elasticity after drying and therefore is very suitable in situations where larger joints and details have to be bridged
Control coat The RibbFill Control Coat has been developed specifically for the joint finishing in sandwich panel systems for the gas-tight finishing of spaces. This coating is often used in storage spaces for long term storage of fruit and vegetables, server spaces, high stage rooms and disinfection spaces. RibbFill Control Coat is resistant against all kinds of acids and oils.
Application The RibbFill products have to be applied in at least two layers by means of an airless-sprayer. The RibbFill products can be applied directly on polystyrene and PU foam. Other substrates have to be pre-treated with a RibbFill primer. We advise to re-enforce joints and details with a RibbFill polyester film. Besseling has been trained and is experienced in applying RibbStyle products according to their specifications.
RIBBSTYLE COATINGS - CORRFILL
The CorrFill products are resistant against high air humidity and temperature and are applied as vapour and moisture- tight finishing of spaces. These products are used, among others, in mushroom cultivation units, composting tunnels, swimming pools and vapour-proofing in the building trade. The CorrFill coating system consists of CorrFill Indoor Coat, CorrFill Limber Coat and CorrFill Tecocryl.
CorrFill Indoor Coat CorrFill Indoor Coat has been developed for the vapor-proof finishing of specific constructions such as in large building projects and industrial buildings. The coating is also applied in spaces with high humidity and high temperatures. CorrFill Indoor Coat is a completely vapor-proof, semi-fluid white paste, dispersed in water. This coating forms after drying a permanent elastic rubber-like layer. CorrFill Indoor Coat has to be applied in at least 2 layers.
CorrFill Limber coat CorrFill Limber coat is mainly applied and recommended in the mushroom industry as protective layer in composting tunnels. This coating is also used for the water-tight finishing of concrete surfaces, the protection of polyurethane insulation foam, the water-tight finishing of reservoirs, etc. CorrFill Limbercoat is a 2-components semi-gloss polyurethane top layer and forms a strong elastic film with an excellent attachment on various substrates. This coating is very resistant against weather influences, chemicals, UV-radiation, mechanical and thermionic influences.
CorrFill Tecocryl The gastight system for the biogas industry/bio-based economy A completely new coating system that was developed in first instance specifically for the bio-based economy. A much larger diversity of application possibilities became already apparent during the development stage of CorrFill Tecocryl. Among others, in the waste disposal industry, mushroom composting, freezer and cold stores and as an extremely strong top layer for other CorrFill systems. The CorrFill Tecocryl system has a high chemical resistance and a strong gas-tight membrane. This coating consists of equivalent products, is simply to repair and has excellent attachment properties.